Powder Coat Finish
Who says appearance does not matter? We know it does, so we sand blast all of our components prior to applying the extremely durable, baked-on powder coat finish. This type of paint is much less susceptible to flaking, chipping, peeling, and fading. Our paint is a reflection of the quality integrated throughout our chippers, a quality that lasts. Plus, it’s a reflection of your business.
|
 |
Rear Pivoting Feed System
The extraordinary design of this feed system uses mechanical leverage to provide unlimited down pressure on the feed roller. This down pressure system allows the feed wheel to utilize optimum torque, which in turn prevents the teeth from slipping as much on the material. This results in a more successful feed. The rear pivoting feed wheel design is so efficient that it eliminates the need for down pressure springs and allows Woodsman to use a single feed wheel to efficiently and effectively feed all types of material.
|
 |
Feed Wheel Assist Cylinder
This is a great feature that is standard on all Woodsman chippers. Our hydraulic lift cylinder is designed to use down pressure to break limbs and crotches. It has lifting power to assist operators when feeding large diameter, short pieces of wood. The feed wheel lift bar is located on both sides of the infeed, making this component more easily accessible and user friendly. |
|
Bottom Drop Door
Our bottom drop door is in place to make interior inspection easier for owners and operators. This door increases safety when working on the machine by providing easy access to the chipper anvil. The anvil can be easily adjusted by one person and, as a safety feature, does not require that you enter the chipper feed area. |
 |
Discharge Chute Inspection Door
This door allows the operator convenient access to the discharge area, making inspection and debris inspection easier. |
 |
Main Frame
Woodsman chippers are solidly mounted on tubular steel frames for extra strength. The frame rails extend underneath the feed tables, giving additional support in the area of the chipper where the majority of work takes place. |
 |
Battery Compartment
Our lockable battery compartment is out in the open for convenient and easy access. This makes any necessary maintenance faster and easier. |
 |
O-Ring Face Seal Hoses
Woodsman uses a hydraulic system which includes O-ring face seal hoses. These ensure a clean, leak-free hydraulic system. |
 |
Double Ended Pigtail
We use a double ended pigtail to connect the chipper brakes and lights to your vehicle. Where the old style wiring required that the entire assembly be replaced when damaged, the double ended pigtail makes repair more convenient if there is damage done to the wire lead. This system only requires a simple plug and replacement instead of completely rewiring the assembly. |
 |
Double Spherical Roller Bearing
Woodsman chippers use a large, double spherical roller bearing, which attaches to the shaft by use of a taper locking adapter sleeve. This ensures a good fit 360 degrees around the shaft, versus the set screw style that locks tight against the shaft in only two places. |
 |
Feed Wheel Drive
The Woodsman chipper feed wheel is controlled by a drive motor on either side, thus eliminating the need for a variety of bearings, bushings, chains, and sprockets. This simplified design means fewer parts replacements and less maintenance for the operator. |
 |
Fuel and Hydraulic Tank
All fuel and hydraulic tanks on Woodsman chippers are equipped with lockable filler caps and sight gauges. |
 |
Yoke Lock
These manual locks are used to hold the yoke in place. They can be used to assist in cleaning the infeed area. |
 |
Height Adjustable Discharge Chute
The discharge chute on all Woodsman chippers can be easily adjusted at three different settings. This is a convenient feature which allows the chips to discharge at the proper height of the operator’s trailer. |
 |